Round Bars

Product Details:

• OHNS OHNS Round Bar is an oil-hardened and non-shrinkage steel alloy grade.

The OHNS Steel Material is required for master tools, gauges as well as dies.

Product Details:

EN24 Round Bar Manufacturers & Suppliers. EN24 Round Bar is a very high strength steel alloy which is supplied hardened & tempered. It is a combination of nickel chromium molybdenum, which offers high tensile strength, good ductility & wear resistance. With relatively good impact properties at low temperature. It is also suitable for a variety of elevated temperature applications. EN24 Round Bar Features are easy to treat & temper & is supplied hardened & tempered. It offers good combination of strength, ductility & wear resistance.

EN24 Round Bar Applications
Drill Bushing, Gears, high strength, Punches & dies

EN24 Round Bar Chemical Composition
Carbon; 0.35-0.45
Phosphorus; 0.040max
Molybdenum; 0.20-0.40
Manganese; 0.45-0.70
Sulfur; 0.040max
Chromium; 0.90-1.40
Silicon; 0.10-0.35
Nickel; 1.30-1.80

EN24 Equivalent Grades
WNR 34CrNiMo6
BS 817M40
AISI 4340
SAE 4340

Additional Information:

• Delivery Time: 1 Day

Product Details:

EN24 is a Nickel Chromium Molybdenum alloy steel specification widely used in the oil and gas sectors. EN24 steel offers toughness and high strength in the heat treated condition, with good fatigue strength. Available in round bar EN24 is available fully certified and suitable for applications requiring a quality high tensile alloy steel. EN24 is commonly used in heat treated condition.

Size range is dia 12mm to 60mm in rounds. Some sizes in squares and hexagons can also be produced against order.

The equivalent grades are EN24, AISI:4340, 817M40, 34CrNiMo6, 40NiCr4Mo3 etc.

EN24 Chemical composition

• Carbon 0.36-0.44%
• Silicon 0.10-0.35%
• Manganese 0.45-0.70%
• Sulphur 0.040 Max
• Phosphorus 0.035 Max
• Chromium 1.00-1.40%
• Molybdenum 0.20-0.35%
• Nickel 1.30-1.70%

Additional Information:

• Delivery Time: 1 day

Product Details:

Hot Die Steel Bar is a dimensionally accurate raw material that is available in solid cylindrical forms that comes in various lengths and diameters as per the application areas where it is going to be installed.

Product Details:

P20 steel flats are a type of low-alloy steel that are tough and moderately strong. They are made using a special melting and refining process to produce a uniform and pure product. P20 steel flats are tested to ensure a regular structure and freedom from defects

Product Details:

P20 plastic mold steel is a low-alloy, low-carbon tool steel that is commonly used for plastic injection mold cavities and tooling. It is characterized by good toughness at moderate strength levels and is typically sold in a pre-hardened condition at a hardness of approximately 300 HBW

Product Details:

HCHCR die steel is a high-carbon, high-chromium alloy steel used in cold work applications that require high accuracy in hardening and tempering. It's available in different shapes and sizes, including round bars, square bars, and plates. HCHCR die steel is used in the construction and automobile industries

Product Details:

Hot die steel bars are dimensionally accurate raw materials that are resistant to hot cracking, have good thermal conductivity, and offer good resistance to heat. They are made with a high carbon content, which makes them more rigid and set when cooled. Die steels are also hardened after they are formed